Dasan V5808 - Running Process; Displaying System Software

UMN:CLI User Manual
V5808
136
Global
CPU-Filter
To clear the collected statistics counter of CPU packet filter, use the following command.
Command
Mode
Description
clear cpu-pkt-filter stats [NAME]
Global
CPU-Filter
Resets the collected statistics counters of CPU packet
filter.
6.3.10 Running Process
The V5808 provides a function that shows information of the running processes. The
information with this command can be very useful to manage the switch.
To display information of the running processes, use the following command.
Command
Mode
Description
show process
Enable
Global
Bridge
Shows information of the running processes.
The following is an example of displaying information of the running processes.
SWITCH# show process
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
admin 1 0.2 0.2 1448 592 ? S 20:12 0:05 init [3]
admin 2 0.0 0.0 0 0 ? S 20:12 0:00 [keventd]
admin 3 0.0 0.0 0 0 ? SN 20:12 0:00 [ksoftirqd_CPU0]
admin 4 0.0 0.0 0 0 ? S 20:12 0:00 [kswapd]
admin 5 0.0 0.0 0 0 ? S 20:12 0:00 [bdflush]
admin 6 0.0 0.0 0 0 ? S 20:12 0:00 [kupdated]
admin 7 0.0 0.0 0 0 ? S 20:12 0:00 [mtdblockd]
admin 8 0.0 0.0 0 0 ? SW< 20:12 0:00 [bcmDPC]
admin 9 1.4 0.0 0 0 ? SW< 20:12 0:29 [bcmCNTR.0]
admin 10 1.4 0.0 0 0 ? SW< 20:12 0:29 [bcmCNTR.1]
admin 17 0.0 0.0 0 0 ? SWN 20:12 0:00 [jffs2_gcd_mtd3]
admin 149 0.0 0.3 1784 776 ? S Jan01 0:00 /sbin/syslogd –m
admin 151 0.0 0.2 1428 544 ? S Jan01 0:00 /sbin/klogd -c 1
admin 103 2.6 2.0 20552 5100 ? S 20:12 0:53 /usr/sbin/swchd
(Omitted)
SWITCH#
6.3.11 Displaying System Software
To display a current system software version, use the following command.
Command
Mode
Description
show version
Enable
Global
Shows a version of system software.