Dasan V5808 - GPON Debug

UMN:CLI User Manual
V5808
794
12.14 GPON Debug
To enable debugging of all GPON or a specific feature of GPON, use the following
command.
Command
Mode
Description
debug gpon { all | func | db |
comm | ugrd | profile | queue |
statistics | rauth}
Enable
GPON
Enables GPON debugging.
all: all GPON features
func: GPON function
db: GPON database
comm.: GPON communication
ugrd: GPON auto-upgrade
profile: GPON profile
queue: GPON queue
statistics: GPON statistics
rauth: GPON radius-authentication
no debug gpon {all | func | db |
comm | ugrd | profile | queue |
statistics | rauth}
Disables GPON debugging.
To enable debugging of OMCI message between OLT and ONT, use the following
command.
Command
Mode
Description
debug gpon omci {console |
syslog}
GPON
Enables GPON OMCI debugging.
console: log output to console
syslog: log output to syslog
no debug gpon omci
Disables GPON OMCI debugging.
To display the debugging status of GPON, use the following command.
Command
Mode
Description
show debugging gpon
Enable
Global
GPON
Shows the debugging status of GPON.