User Manual UMN:CLI
V5808
707
“Remote failure”, “Local failure”) from ONT.
IP-Path Management
To configure the ONT provisioning feature in GPON-OLT Configuration mode and specify
a FTP server and GPON provisioning file, use the following command.
onu mgmt-mode ip-path
ONU_ID ftp id ID password
[PASSWORD]
Sets an user name and password to access FTP server
for GPON ONT provisioning.
ONU-ID: 1-128 or ONU serial number
ID: user name
PASSWD: password
onu mgmt-mode ip-path
ONU_ID uri URI file
{FILE_NAME | none}
Specifies a FTP server and ONT provisioning file (XML
file) name.
URI: FTP server address
FILE_NAME: ONT provisioning file name
none: The file name is named after GPON serial number
of each ONT. The ONT is supposed to ask .xml
provisioning file named after its own GPON serial
number. If selecing this option, it is necessary that the
FTP server has each .xml provisioning file corresponding
to each ONT.
no onu mgmt-mode ip-path
ONU_ID
Deletes the configurations of GPON provisioning.
To configure the ONT provisioning feature in ONU-Profile Configuration mode and specify
a FTP server and GPON provisioning file, use the following command.
Selects the MGMT IP-Path mode for ONT provisioning.
mgmt-mode ip-path ftp id ID
password [PASSWORD]
Sets an user name and password to access FTP server
for GPON ONT provisioning.
ID: user name
PASSWD: password
mgmt-mode ip-path uri URI
file {FILE_NAME | none}
Specifies a FTP server and ONT provisioning file (XML
file) name.
URI: FTP server address
FILE_NAME: ONT provisioning file name
none: The file name is named after GPON serial number
of each ONT. The ONT is supposed to ask .xml
provisioning file named after its own GPON serial
number. If selecing this option, it is necessary that the
FTP server has each .xml provisioning file corresponding
to each ONT.
Deletes the configured GPON provisioning mode.
Deletes the configurations of GPON provisioning per
ONT.
To Next Page
Loading...