Dasan V5808 - Changing ONU Registration Mode; ONU Service Mode

UMN:CLI User Manual
V5808
652
Upon registering an ONU automatically, the registration mode of the ONU will be changed
to the manual mode. Note that when you use this command, the registration mode of the
ONUs that are already registered in the auto mode will be changed to the manual mode
as well.
To change the ONU registration mode from auto to manual mode, use the following
command.
Command
Mode
Description
olt auto-to-manual OLT-ID
enable
GPON
Sets the current ONU registration mode to the manual
mode.
OLT-ID: GPON port number
olt auto-to-manual enable
GPON-OLT
To change the ONU registration mode from manual to auto mode, use the following
command.
Command
Mode
Description
olt auto-to-manual OLT-ID
disable
GPON
Sets the current ONU registration mode to the auto
mode.
olt auto-to-manual disable
GPON-OLT
To display the ONU registration mode, use the following command.
Command
Mode
Description
show olt auto-to-manual [OLT-ID]
Enable
Global
GPON
Shows the current ONU registration mode.
show olt auto-to-manual
GPON-OLT
12.2.1.5 Changing ONU Registration Mode
If user wants to change automatically the states of ONU (ONT) to manage manually at a
time, use the following command.
Command
Mode
Description
onu fix {all | ONU-ID}
GPON-OLT
Changes automatically registered ONUs (ONTs) to
manage manually.
ONU-ID: ONU ID (1 to 128) or ONU serial number
12.2.1.6 ONU Service Mode
Depending on the individual FTTH subscriber network deployment, the GPON link can be
terminated with different client-side equipment options like Single Family Unit (SFU) and
Home Gateway Unit (HGU). To select the ONU network service mode, use the following
command.
Command
Mode
Description
onu service-mode ONU-ID {hgu |
GPON-OLT
Specifies the network service mode of ONU.