Dasan V5808 - Displaying Mcfdb Information

User Manual UMN:CLI
V5808
473
To specify the maximum number of forwarding entries on the McFDB, use the following
command.
Command
Mode
Description
ipv6 mcfdb aging-limit
<256-65535>
Global
Specifies the maximum number of forwarding entries
on the McFDB.
256-65535: number of entries (default: 5000)
no ipv6 mcfdb aging-limit
Deletes the specified maximum number of forwarding
entries.
10.2.1.3 Displaying McFDB Information
To display McFDB information, use the following command.
Command
Mode
Description
show ipv6 mcfdb
Enable
Global
Bridge
Shows the current aging time and maximum number of
forwarding entries.
show ipv6 mcfdb aging-entry
[vlan VLAN | group X:X::X:X]
[mac-based | detail]
Shows the current forwarding entries.
VLAN: VLAN ID (1-4094)
X:X::X:X: IPv6 multicast group address
mac-based: lists entries on a MAC address basis
To clear multicast forwarding entries, use the following command.
Command
Mode
Description
clear ipv6 mcfdb [* | vlan VLAN]
Enable
Global
Clears multicast forwarding entries.
*: all forwarding entries
VLAN: VLAN ID (1-4094)
clear ipv6 mcfdb vlan VLAN
group X:X::X:X source X:X::X:X
Clears a specified forwarding entry.
group: : IPv6 multicast group address
source: IPv6 address