Dasan V5808 - Mask Calculation of Default Value

UMN:CLI User Manual
V5808
246
RPROB (12)
ICMP_TIMESTAMP (13)
OFF
ICMP_TIMESTAMPREPLY (14)
OFF
ICMP_INFO_REQUEST (15)
OFF
ICMP_INFO_REPLY (16)
OFF
ICMP_ADDRESS (17)
OFF
ICMP_ADDRESSREPLY (18)
OFF
Tab. 7.2 Mask Calculation of Default Value
To configure the limited ICMP transmission time, use the following command.
Command
Mode
Description
ip icmp interval rate-limit
INTERVAL
Global
Configures a limited ICMP transmission time.
INTERVAL: 0-2000000000 (unit: 10 ms)
The default ICMP interval is 1 second (100 ms).
To return to default ICMP configuration, use the following command.
Command
Mode
Description
ip icmp interval default
Global
Returns to default configuration.
To display ICMP interval configuration, use the following command.
Command
Mode
Description
show ip icmp interval
Enable
Global
Bridge
Shows ICMP interval configuration.
i