Dasan V5808 - Additional TACACS+ Configuration; Authentication Type; Priority Level

User Manual UMN:CLI
V5808
73
4.2.5.3 Timeout of Authentication Request
After the authentication request, the V5808 waits for the response from the TACACS+
server for specified time. To specify a timeout value, use the following command.
Command
Mode
Description
login tacacs timeout <1-100>
Global
Specifies a timeout value.
1-100: timeout value for the response (default: 5)
no login tacacs timeout
Deletes a specified timeout value.
4.2.5.4 Additional TACACS+ Configuration
The V5808 provides several additional options to configure the system authentication via
TACACS+ server.
TCP Port for the Authentication
To specify TCP port for the system authentication, use the following command.
Command
Mode
Description
login tacacs socket-port
<1-65535>
Global
Specifies TCP port for the authentication.
1-65535: TCP port
no login tacacs socket-port
Deletes a specified TCP port for the authentication.
Authentication Type
To select the authentication type for TACACS+, use the following command.
Command
Mode
Description
login tacacs auth-type {ascii |
pap | chap}
Global
Selects an authentication type for TACACS+.
ascii: plain text
pap: password authentication protocol
chap: challenge handshake authentication protocol
no login tacacs auth-type
Deletes a specified authentication type.
Priority Level
According to a defined priority level, the user has different authority to access the system.
This priority should be defined in the TACACS+ server in the same way. To define the
priority level of user, use the following command.
Command
Mode
Description
login tacacs priority-level {min |
user | max | root}
Global
Defines the priority level of user, see the below
information for the order of priority.
no login tacacs priority-level
Deletes a defined priority level.