Dasan V5808 - ONU DBA Profile

User Manual UMN:CLI
V5808
675
PORT } mep-id MEP_ID {rmep-id <1-
8191> | rmac MACADDR} [ttl <1-64>]
MEP_ID: MEP ID
1-8191: destination MEP ID
MACADDR: destination MAC address to send
LBMs/LTMs
NUMBER: the number of attempts for sending
LBMs (default:1)
1-64: LBM/LTM’s TTL value (default: 64)
To display the information of CFM OAM, use the following command.
Command
Mode
Description
show onu cfm mep OLT_ID
Enable
Global
GPON
Shows the information of MEP configured on an OLT.
show onu cfm mip OLT_ID
Shows the information of MIP configured on an OLT.
show onu cfm ma [<1-65535>]
GPON
Shows the information of MA.
show onu cfm md [DOMAIN]
Shows the configured MD and level.
show onu cfm mep ONU_ID
GPON-OLT
Shows the status of MEP configured on an ONU.
show onu cfm mep ccm-db
ONU_ID {uni eth PORT | ani
mapper NUMBER} mep-id
MEP_ID
Shows the information of a MEP in the CCM database.
show onu cfm mip [ONU_ID]
Shows the status of MIP configured on an ONU.
12.2.23 ONU DBA Profile
To specify the bandwidth of ONU port by mapping between T-CONT ID and DBA profile,
use the following command.
Command
Mode
Description
onu dba-profile ONU_ID tcont
TCONT-ID PROF_NAME
GPON-OLT
Specifies the bandwidth of ONU by mapping between
the DBA profile and T-CONT ID. Sets T-CONT’s
bandwidth by specifying the DBA profile
ONU_ID:ONU ID or ONU serial number
TCONT_ID: TCONT ID (1-32)
PROF_NAME: DBA profile name
no onu dba-profile ONU_ID
tcont TCONT-ID
Deletes the configured DBA profile.