Dasan V5808 - Fan Operation; Enabling FTP;TFTP Connection

User Manual UMN:CLI
V5808
115
It is possible to delete DNS server and domain name at the same time with the below
command.
Command
Mode
Description
no dns
Global
Deletes DNS server and domain name.
6.1.9 Fan Operation
For the V5808, it is possible to control fan operation. To control fan operation, use the
following command.
Command
Mode
Description
fan operation {on | off | auto}
Global
Configures fan operation.
It is possible to configure to start and stop fan operation according to the system
temperature. To configure this, see Section 6.1.13.3.
To display fan status and the temperature for fan operation, use the following command.
Command
Mode
Description
show status fan
Enable
Global
Bridge
Shows the fan status and the temperature for the fan
operation.
6.1.10 Enabling FTP/TFTP Connection
To enable/disable the connection via FTP, use the following command.
Command
Mode
Description
service ftp
Global
Enables/ disables the connection via FTP.
no service ftp
To enable/disable the connection via TFTP, use the following command.
Command
Mode
Description
service tftp
Global
Enables/ disables the connection via TFTP.
no service tftp
To display the status of network connection services, use the following command.
Command
Mode
Description
show service
Enable/Global/Bridge
Shows the status of network connection services
(telnet/ssh/ftp/tftp/snmp).
i