Dasan V5808 - OLT Bandwidth; Upstream Bandwidth

User Manual UMN:CLI
V5808
629
olt key-exchange stop
Stops periodic process of encryption key exchange.
To display the status of encryption mode or information of the encryption key exchange
process, use the following command.
Command
Mode
Description
show onu encryption OLT-ID
Enable
Global
GPON
Shows the status of encryption mode.
OLT-ID: GPON port number
ONU-ID: ONU ID (1 to 128) or ONU serial number
show onu encryption [ONU-ID]
GPON-OLT
show olt key-exchange [OLT-ID]
Enable
Global
GPON
Shows the configured interval and the encryption key
exchange process information.
show olt key-exchange
GPON-OLT
12.1.3 OLT Bandwidth
12.1.3.1 Upstream Bandwidth
To set the total amount of bandwidth in use for upstream traffic, use the following
command.
Command
Mode
Description
olt total upstream-bw <1031616-
1244160>
GPON-OLT
Sets the total amount of bandwidth in use for upstream
traffic.
1031616-1244160: total upstream bandwidth (default:
1120000kbps)
no olt total upstream-bw
Deleted the configured total amount of bandwidth in
use for upstream traffic.
To display the information of OLT’s total upstream bandwidth, use the following command.
Command
Mode
Description
show olt total upstream-bw OLT-
ID
Enable
Global
GPON
Shows the total upstream bandwidth of OLT
show olt total upstream-bw
GPON-OLT