Dasan V5808 - Page 691

User Manual UMN:CLI
V5808
691
sla maximum 4096
apply
!
...
multicast-profile V501 create 
igmp tag-control add vid 501 cos 0
igmp access-list vid 501 dst-ip start 224.0.0.1 end 239.255.255.255 gem 4094
apply
!
...
extended-vlan-tagging-operation V200 create 
downstream-mode enable
untagged-frame 1
treat inner vid 200 cos 0 tpid 0x8100
apply
!
extended-vlan-tagging-operation V903 create 
downstream-mode enable
untagged-frame 1
treat inner vid 903 cos 0 tpid 0x8100
apply
!
extended-vlan-tagging-operation V501 create 
downstream-mode enable
untagged-frame 1
treat inner vid 501 cos 0 tpid 0x8100
apply
!
...
voip-profile SIP create 
codec-nego 1 codec pcma packet-period 10 silence-suppression 1
codec-nego 2 codec pcmu packet-period 10 silence-suppression 1
codec-nego 3 codec g729 packet-period 10 silence-suppression 1
codec-nego 4 codec g723 packet-period 10 silence-suppression 1
protocol sip
proxy-server 10.45.2.1
outbound-proxy-server 10.45.2.2
register-server 10.45.2.3
host-part-server 10.45.2.4
dns primary 168.126.63.1
apply
!
...
 Add a specific GEM port ID (4094) to the multicast stream.
 Create DBA profiles (BE - for Internet service, VOIP - for VoIP service).
And then configure the corresponding settings.
 Create a multicast profile (V501). And then configure the corresponding settings.
 Create extended VLAN tagging operation profiles (V200 - for Internet service, V903
- for VoIP service, V501 - for multicast service). And then configure the corresponding
settings.
 Create a VoIP profile (SIP). And then configure the corresponding settings.