Dasan V5808 - Page 180

UMN:CLI User Manual
V5808
180
any: any ToS value (ignore)
ip-precedence {<0-7> | any}
Classifies IP precedence.
0-7: IP precedence value
any: any IP precedence value (ignore)
length {<21-65535> | any}
Classifies a packet length.
21-65535: IP packet length
any: any IP packet length (ignore)
ethtype {TYPE-NUM | arp | any}
Classifies the Ethernet type.
TYPE-NUM: Ethernet type field (hex, e.g. 0800 for
IPv4)
arp: address resolution protocol
any: any Ethertype (ignore)
ip header-error
Classifies the IP header-error.
ip header-length <1-15>
Classifies the IP header-length.
1-15: IP header-length value
traffic-class {<0-255> | any}
Classifies the packet’s traffic-class filed value.
flow-label {<0-65535> | any}
Classifies the packet’s flow-label filed value.
ip header-error command can be used only when specifying a source and destination IP
address as a packet-classifying pattern.
To delete a specified packet-classifying pattern, use the following command.
Command
Mode
Description
no cos
Flow
Deletes a specified packet-classifying pattern for each
option.
no dscp
no tos
no length
no ip-precedence
no ethtype
no mac
no mac da-found
no mac da-not-found
no ip
no ipv6
no ip header-length
no ip header-error
no traffic-class
no flow-label
!