Dasan V5808 - Page 307

User Manual UMN:CLI
V5808
307
8.3.6.6 Displaying Configuration
To display the configuration of MSTP, use the following command.
Command
Mode
Description
show spanning-tree mst <1-64>
Enable
Global
Bridge
Shows all configurations of a specific MSTP instance:
1-64: MSTP instance ID number
show spanning-tree mst <1-64>
active [detail]
Bridge
Shows information of a specific MSTP instance on
active interface:
1-64: MSTP instance ID number.
detail: detailed MSTP information (as option).
show spanning-tree mst <1-64>
blockedport
Shows information of the blocked ports
show spanning-tree mst <1-64>
detail [active]
Shows detailed information of the specific MSTP
instance:
1-64: MSTP instance ID number.
show spanning-tree mst <1-64>
inconsistentports
Shows information of root-inconsistency state.
1-64: MSTP instance ID number.
show spanning-tree mst <1-64>
bridge [ address | detail |
forward-time | hello-time | id |
max-age | protocol | priority |
priority [system-id] ]
Shows information of the bridge status and
configuration of a specific MSTP instance
1-64: MSTP instance ID number.
show spanning-tree mst <1-64>
root [ address | cost | detail |
forward-time | hello-time | id |
max-age | port | priority | priority
[system-id] ]
Shows the status and configuration for the root bridge
of a specifiec MSTP instance.
1-64: MSTP instance ID number.
show spanning-tree mst <1-64>
port PORTS [ active [detail] |
cost | detail [active] | edgeport |
inconsistency | rootcost | state |
priority ]
Shows information of MSTP instance for specified port.
1-64: MSTP instance ID number.
show spanning-tree mst
configuration [digest]
Shows information of the region configuration:
digest: MD5 digest included in the current MSTCI
show spanning-tree mst <1-64>
summary [totals]
Shows a summary of a specific MSTP instance:
totals: the total lines of MSTP