Dasan V5808 - Page 53

User Manual UMN:CLI
V5808
53
Command
Mode
Description
history non-volatile [<10-2000>]
Global
Saves the command history.
10-2000: history recording max. count (default:2000)
To delete the non-volatile command history, use the following command.
Command
Mode
Description
clear history non-volatile
Global
Deletes the command history.
no history non-volatile
Disables the function to save a command history.
The system records the command history per the user. To delete the non-volatile
command history of the specific user, use the following command.
Command
Mode
Description
remove history user NAME
Global
Deletes the command history of the specified user.
NAME: user name
To display the command history, use the following command.
Command
Mode
Description
show history
Enable
Shows a command history.
show cli history list
Shows a command history list.
show history non-volatile [<1-
2000>]
Enable
Global
Shows a command history.
non-volatile: reserves the command history.
1-2000: line number to be displayed
show history non-volatile user
NAME [<1-2000>]
Shows the command history of specified user.
NAME: user name
1-2000: line number to be displayed
To enable/disable the command history logging, use the following command.
Command
Mode
Description
command-history-log enable
[default]
Enable
Global
Enables the command history logging.
command-history-log disable
[default]
Disables the command history logging.
To display the command history logging in SNMP, use the following command.
Command
Mode
Description
command-history-log snmp {get
| set | all | none}
Enable
Global
Shows command history logs in SNMP.
all: all of logs of the SNMP
get: logs that SNMP get request .
none: no history that SNMP request.