Dasan V5808 - Page 557

User Manual UMN:CLI
V5808
557
To configure a virtual link with one option, use the following command.
Command
Mode
Description
area {<0-4294967295> | A.B.C.D} virtual-link
A.B.C.D authentication [message-digest | null]
Router
Configures a virtual link.
area {<0-4294967295> | A.B.C.D} virtual-link
A.B.C.D authentication-key KEY
area {<0-4294967295> | A.B.C.D} virtual-link
A.B.C.D message-digest-key KEY md5 KEY
area {<0-4294967295> | A.B.C.D} virtual-link
A.B.C.D hello-interval <1-65535>
area {<0-4294967295> | A.B.C.D} virtual-link
A.B.C.D retransmit-interval <1-65535>
area {<0-4294967295> | A.B.C.D} virtual-link
A.B.C.D dead-interval <1-65535>
area {<0-4294967295> | A.B.C.D} virtual-link
A.B.C.D transmit-delay <1-65535>
The following example shows how to configure virtual link with more than 2 options:
• area <0-4294967295> virtual-link A.B.C.D authentication-key KEY authentication
[message-digest | null]
• area <0-4294967295> virtual-link A.B.C.D hello-interval <1-65,535> dead-interval
<1-65535>
To delete a configured virtual link, use the following command.
Command
Mode
Description
no area {<0-4294967295> | A.B.C.D} virtual-link
A.B.C.D authentication [message-digest | null]
Router
Deletes a configured virtual link.
no area {<0-4294967295> | A.B.C.D} virtual-link
A.B.C.D authentication-key KEY
no area {<0-4294967295> | A.B.C.D} virtual-link
A.B.C.D message-digest-key KEY md5 KEY
no area {<0-4294967295> | A.B.C.D} virtual-link
A.B.C.D hello-interval <1-65535>
no area {<0-4294967295> | A.B.C.D} virtual-link
A.B.C.D retransmit-interval <1-65535>
no area {<0-4294967295> | A.B.C.D} virtual-link
A.B.C.D dead-interval <1-65535>
no area {<0-4294967295> | A.B.C.D} virtual-link
A.B.C.D transmit-delay <1-65535>