Dasan V5808 - Page 589

User Manual UMN:CLI
V5808
589
Command
Mode
Description
show debugging ipv6 ospf
Enable
Global
Bridge
Shows the debugging information of OSPFv3.
11.3.14.6 Displaying OSPFv3 Protocol Information
To display OSPFv3 information, use the following command.
Command
Mode
Description
show ipv6 protocols ospf
Enable
Global
Shows a current status of OSPFv3 protocol and its
information.
To clear OSPFv3 information being used in router, use the following command.
Command
Mode
Description
clear ipv6 ospf route [WORD] process
Enable
Global
Resets OSPF process.
WORD: OSPFv3 process tag