Dasan V5808 - Page 611

User Manual UMN:CLI
V5808
611
11.5.15.2 Displaying Debugging Information
To quickly diagnose problems, the debug command is useful for customers. To enable
debugging of RIP routing transactions, use the following command.
Command
Mode
Description
debug ipv6 rip [all]
Enable
Turns on all debugging options of changed RIP
information.
debug ipv6 rip events
Enables a debugging of RIP event such as packet
transmission and RIP information change.
debug ipv6 rip nsm
Enables RIP NSM debugging.
debug ipv6 rip packet [recv |
send]
Shows more detailed information about RIP packet.
The information includes address of packet
transmission and port number.
debug ipv6 rip packet [recv |
send] detail
To disable debugging of RIP routing transactions, use the following command.
Command
Mode
Description
no debug ipv6 rip [all]
Enable
Turns off all debugging options of changed RIP
information.
no debug ipv6 rip events
Disables a debugging of RIP event such as packet
transmission and RIP information change.
no debug ipv6 rip nsm
Disables RIP NSM debugging.
no debug ipv6 rip packet [recv |
send]
Disables a debugging of RIP packets.
no debug ipv6 rip packet [recv |
send] detail
To display the debugging information, use the following command.
Command
Mode
Description
show debugging ipv6 rip
Enable
Global
Bridge
Shows the debugging information of RIP.