Dasan V5808 - Page 620

UMN:CLI User Manual
V5808
620
igp: local IGP
incomplete: the origin of the path information is
unknown or learned through other means
match route-type external {type-
1 | type-2}
Matches the route type.
To delete the specified match criteria, use the following command.
Command
Mode
Description
no match as-path [WORD]
Route-map
Removes the specified match criteria.
no match community {<1-99> | <100-199> |
WORD } [exact-match]
no match interface [INTERFACE]
no match ip address [{<1-199> | <1300-2699> |
WORD}]
no match ip address prefix-list [WORD]
no match ip next-hop {<1-199> | <1300-2699> |
WORD | prefix-list [WORD] }
no match ipv6 address WORD
no match ipv6 address prefix-list WORD
no match ip next-hop {X:X::X:X | WORD}
no match {metric | tag} <0-4294967295>
no match origin {egp | igp | incomplete}
no match route-type external {type-1 | type-2}
Step 3
Use the set command that specifies the set redistribution actions to be performed, if the
match criteria are met.
Command
Mode
Description
set aggregator as <1-65535> A.B.C.D
Route-map
Sets the AS number for the route map
and router ID.
set as-path prepend <1-65535>
Modifies an AS path for a route.
set atomic-aggregate
Sets an atomic aggregate attribute.
set community {AA:NN | internet | local-AS |
no-advertise | no-export} [additive]
Sets the communities attribute.
AA:NN : AA= AS number, NN = number
assigned to community
internet: specifies the internet
local-AS: specifies no sending outside
the local AS
no-advertise: specifies no
advertisement of this route to eBGP
peers
no-export: specifies no advertisement of
this route to any peer
set community [none]