Dasan V5808 - Page 688

UMN:CLI User Manual
V5808
688
GPON
show onu system-status ONU-ID
GPON-OLT
show onu video status OLT-ID
ONU-ID
Enable
Global
GPON
Shows the ONU’s RF video status.
show onu video status ONU-ID
GPON-OLT
To display the status of ONU supporting Power over Ethernet (PoE) feature, use the
following command.
Command
Mode
Description
show onu poe status OLT-ID
ONU-ID
Enable
Global
GPON
Shows the status of PoE ONU system.
show onu poe status ONU-ID
GPON-OLT
To display the multicast counter information per UNI Ethernet port of ONU, use the
following command.
Command
Mode
Description
show onu igmp-pm-data OLT-ID
ONU-ID uni eth UNI-PORT
Enable
Global
GPON
Shows the IGMP message counters per UNI port of
ONU. The counters are a total number of
successful/unsuccessful joins, leave messages,
general queries, specific queries and invalid IGMP
messages.
ONU-ID: 1-128 or ONU serial number
UNI-PORT: UNI port number
show onu igmp-pm-data ONU-ID
uni {eth | virtual-eth} UNI-PORT
GPON-OLT
clear onu igmp-pm-data ONU-ID
uni {eth | virtual-eth} UNI-PORT
Clears the collected IGMP message counters.
To display the PPPoE information of ONU, use the following command.
Command
Mode
Description
show onu pppoe account OLT-ID
Enable
Global
GPON
Shows the PPPoE account of ONU.
show onu pppoe status OLT_ID
Shows the ONU status information for PPPoE.
show onu pppoe account ONU-
ID
GPON-OLT
Shows the PPPoE account of ONU.
show onu pppoe status ONU_ID
Shows the ONU status information for PPPoE.
To display the system or RF video status of ONU, use the following command.
Command
Mode
Description
show onu video-status update
Enable
Shows the ONU’s RF video update status.