Dasan V5808 - Page 758

UMN:CLI User Manual
V5808
758
ADDRESS: SIP proxy server IP address or URI
no proxy-server
Deletes the configured address of SIP proxy server.
To specify an outbound SIP proxy server, use the following command.
Command
Mode
Description
outbound-proxy-server
ADDRESS
VoIP-SIP
Configures IP address or URI of outbound SIP proxy server
for SIP signalling messages.
ADDRESS: outbound SIP proxy server IP address or URI
no outbound-proxy-server
Deletes the configured address of outbound SIP proxy
server.
To specify an SIP DNS, use the following command.
Command
Mode
Description
dns primary A.B.C.D
[secondary A.B.C.D]
VoIP-SIP
Specifies the primary/secondary SIP DNS IP address.
A.B.C.D: primary/secondary DNS server address (default: 0
(= no primary/secondary SIP DNS is defined))
no dns
Deletes the configured address of SIP DNS server.
To specify a register server, use the following command.
Command
Mode
Description
register-server ADDRESS
VoIP-SIP
Specifies the register server IP address or resolved name.
ADDRESS: register server address
no register-server
Deletes the configured address of register server.
To identify an SIP gateway softswitch vendor, use the following command.
Command
Mode
Description
soft-switch NAME
VoIP-SIP
Identifies the SIP gateway softswitch vendor.
NAME: vendor name
no soft-switch
Deletes the configured SIP gateway softswitch vendor
name.
The format of vendor name is four ASCII coded alphabetic characters (A..Z) as defined in
ATIS-0322000. A value of four null characters indicates no particular vendor.
To configure the SIP registration expiration time, use the following command.
Command
Mode
Description
reg-exp-time <0-65535>
VoIP-SIP
Specifies the SIP registration expiration time. If the value is
0, the SIP agent does not add an expiration time to the
registration requests and does not perform re-registration.
i