UMN:CLI User Manual
V5808
780
To enable/disable the performance monitoring (PM) function to collect the traffic statistics
of the configured ANI port, use the following command.
Enables PM function to collect the data of ANI port’s
counters that are FCS error and the downstream GEM
frame discarded due to buffer overflow or etc.
Disables PM function to collect the data of ANI port’s
counters.
To enable/disable the performance monitoring (PM) function to collect the traffic statistics
of the configured pseudowire, use the following command.
Enables the PM function to collect the pseudowire-
related counters.
Disables the PM function to collect the pseudowire-
related counters.
To enable/disable the performance monitoring (PM) function to collect the traffic statistics
of the configured UNI port as Ethernet type 3, use the following command.
Enables the PM function to collect the counters of the
configured UNI port as Ethernet type 3.
Disables the PM function to collect the counters of the
configured UNI port as Ethernet type 3.
To enable/disable the performance monitoring (PM) function to collect the traffic statistics
of the Ethernet frame over the configured UNI port, use the following command.
pm uni-eth-frame { us | ds }
Enables the PM function to collect the Ethernet frame
related conuters of UNI port.
us: upstream
ds: downstream
Disables the PM function to collect the Ethernet frame
related conuters of UNI port.
To enable/disable the performance monitoring (PM) function to collect the traffic statistics
of the configured CES UNI port, use the following command.
Enables the PM function to collect the counters of the
configured CES UNI port.
Disables the PM function to collect the counters of the
configured CES UNI port.
To Next Page
Loading...