UMN:CLI User Manual
V5808
378
higher precedence. If a problem occurs on Master Router and there are more than two
routers, one of them is selected as new Master Router according to their precedence.
To configure Priority of Virtual Router or delete the configuration, use the following
commands.
Configures Priority of Virtual Router.
Deletes configured Priority of Virtual Router.
Priority of Virtual Backup Router can be configured from 1 to 254.
To set VRRP advertisement timers or delete the configuration, use the following
command.
vr-timers advertisement <1-10>
Sets VRRP timers.
1-10: advertisement time in the unit of second
no vr-timers advertisement
Clears a configured VRRP time.
The following is an example of configuring Master Router and Backup Router by
comparing their Priorities: Virtual Routers, Layer 3 SWITCH 1 – 101 and Layer 3
SWITCH 2 – 102. Then, regardless of IP addresses, one that has higher Priority, Layer 3
SWITCH 2 becomes Master Router.
To Next Page
Loading...