UMN:CLI User Manual
V5808
60
access to Privileged EXEC Enable mode.
To define the security level and its authority, use the following command.
privilege view level <0-15>
{COMMAND | all}
Uses the specific command of Privileged EXEC View
mode in the level.
privilege enable level <0-15>
{COMMAND | all}
Uses the specific command of Privileged EXEC Enable
mode in the level.
privilege configure level <0-15>
{COMMAND | all}
Uses the specific command of Global Configuration
mode in the level.
privilege interface level <0-15>
{COMMAND | all}
Uses the specific command of Interface Configuration
mode in the level.
privilege vrrp level <0-15>
{COMMAND | all}
Uses the specific command of VRRP Configuration
mode in the level.
privilege rip level <0-15>
{COMMAND | all}
Uses the specific command of RIP Configuration mode
in the level.
privilege bgp level <0-15>
{COMMAND | all}
Uses the specific command of BGP Configuration
mode in the level.
privilege ospf level <0-15>
{COMMAND | all}
Uses the specific command of OSPF Configuration
mode in the level.
privilege bridge level <0-15>
{COMMAND | all}
Uses the specific command of Bridge Configuration
mode in the level.
privilege flow level <0-15>
{COMMAND | all}
Uses the specific command of Flow Configuration
mode in the level.
privilege policer level <0-15>
{COMMAND | all}
Uses the specific command of Policer Configuration
mode in the level.
privilege policy level <0-15>
{COMMAND | all}
Uses the specific command of Policy Configuration
mode in the level.
privilege rmon-alarm level
<0-15> {COMMAND | all}
Uses the specific command of RMON Configuration
mode in the level.
privilege rmon-event level
<0-15> {COMMAND | all}
privilege rmon-history level
<0-15> {COMMAND | all}
privilege dhcp-pool level
<0-15> {COMMAND | all}
Uses the specific command of DHCP Pool
Configuration mode in the level.
privilege dhcp-pool-class level
<0-15> {COMMAND | all}
Uses the specific command of DHCP Pool Class
Configuration mode in the level.
privilege dhcp-option82 level
<0-15> {COMMAND | all}
Uses the specific command of DHCP Option 82
Configuration mode in the level.
privilege dhcp-class level
<0-15> {COMMAND | all}
Uses the specific command of DHCP Class
Configuration mode in the level.
privilege route-map level
Uses the specific command of Route-map
To Next Page
Loading...