Cisco Catalyst 4500 Series - Page 1044

41-6
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 41 Configuring Campus Fabric
Configuring Fabric Edge Devices
device(config-fabric-auto-domain)#context name eg-context ID 10
device(config-fabric-auto-domain)#host-pool name VOICE_DOMAIN
device(config-fabric-auto-domain-host-pool)#vlan 10
device(config-fabric-auto-domain-host-pool)#context eg-context
device(config-fabric-auto-domain-host-pool)#gateway 192.168.1.254/24
device(config-fabric-auto-domain-host-pool)#use-dhcp 209.165.201.6
This is sample output for the fabric edge configuration:
device#show running-config
!
ip vrf eg-context
description Auto-provisioned vrf for eg-context
!
ip dhcp relay information option vpn
ip dhcp relay information option
!
ip dhcp snooping vlan 10
ip dhcp snooping
!
!
fabric auto
!
domain default
control-plane 192.168.1.4 auth-key example-key1
control-plane 192.168.1.5 auth-key example-key2
border 192.168.1.6
context name eg-context id 10
!
host-pool name VOICE_DOMAIN
context eg-context
vlan 10
gateway 192.168.1.254/24
use-dhcp 209.65.201.6
exit
exit
exit
!
vlan 10
name VOICE_DOMAIN
!
interface Vlan10
ip vrf forwarding eg-context
ip dhcp relay source-interface Loopback0
ip address 192.168.1.254 255.255.255.0
ip helper-address global 209.65.201.6
no ip redirects
ip local-proxy-arp
ip route-cache same-interface
no lisp mobility liveness test
lisp mobility eg-context.EID.VOICE_DOMAIN
!
router lisp
encapsulation vxlan
locator-set default.RLOC
IPv4-interface Loopback0 priority 10 weight 10
exit
!
eid-table default instance-id 0
exit
!
eid-table vrf eg-context instance-id 10
dynamic-eid eg-context.EID.VOICE_DOMAIN
database-mapping 192.168.1.0/24 locator-set default.RLOC