Cisco Catalyst 4500 Series - Onboard Failure Logging (OBFL)

To Next Page

To Previous Page

CHAPTER

71-1

Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex

Onboard Failure Logging (OBFL)

This chapter includes the following major sections:

• Prerequisites for OBFL, page 71-1

• Restrictions for OBFL, page 71-2

• Information About OBFL, page 71-2

• Default Settings for OBFL, page 71-8

• Enabling OBFL, page 71-8

• Configuration Examples for OBFL, page 71-9

Note For more information about Onboard Failure Logging, see:

http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/12sobfl.html

For complete syntax and usage information for the switch commands used in this chapter, see the

Cisco IOS Command Reference Guides for the Catalyst 4500 Series Switch.

If a command is not in the Cisco Catalyst 4500 Series Switch Command Reference , you can locate it in

the Cisco IOS Master Command List, All Releases.

Prerequisites for OBFL

None.

Other manuals for Cisco Catalyst 4500 Series