Cisco Catalyst 4500 Series Software Configuration Guide

50-5
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 50 X.509v3 Certificates for SSH Authentication
Configuration Examples for 509v3 Certificates for SSH Authentication
Configuration Examples for 509v3 Certificates for SSH
Authentication
• Example: Configuring Digital Certificates for Server Authentication, page 50-5
• Example: Configuring Digital Certificate for User Authentication, page 50-5
Example: Configuring Digital Certificates for Server Authentication
Switch> enable
Switch# configure terminal
Switch(config)# ip ssh server algorithm hostkey x509v3-ssh-rsa
Switch(config)# ip ssh server certificate profile
Switch(ssh-server-cert-profile)# server
Switch(ssh-server-cert-profile-server)# trustpoint sign trust1
Switch(ssh-server-cert-profile-server)# exit
Example: Configuring Digital Certificate for User Authentication
Switch> enable
Switch# configure terminal
Switch(config)# ip ssh server algorithm authentication publickey
Switch(config)# ip ssh server algorithm publickey x509v3-ssh-rsa
Switch(config)# ip ssh server certificate profile
Switch(ssh-server-cert-profile)# user
Switch(ssh-server-cert-profile-user)# trustpoint verify trust2
Switch(ssh-server-cert-profile-user)# end
Step 7
Switch(ssh-server-cert-profile-user)#
trustpoint sign PKI-trustpoint-name
Configures the public key infrastructure (PKI) trustpoint that is used
to verify the incoming user certificate.
Note Configure multiple trustpoints by executing
the same command multiple times. A
maximum of 10 trustpoints can be configured.
Step 8
Switch(ssh-server-cert-profile-user)#
ocsp-response include
(Optional) Sends the Online Certificate Status Protocol (OCSP)
response or OCSP stapling along with the server certificate.
Note By default, no OCSP response is sent along
with the server certificate.
Step 9
Switch(ssh-server-cert-profile-user)#
end
Exits SSH server certificate profile user configuration mode and
returns to privileged EXEC mode.
Command or Action Purpose

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E