Cisco Catalyst 4500 Series - Example: Show Avc Dns-As Client Status

45-22
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 45 Configuring AVC with DNS-AS
Monitoring AVC with DNS-AS
Example: show avc dns-as client status
Switch# show avc dns-as client status
DNS-AS client is enabled
Back to Table 45-2.
Example: show avc dns-as client trusted-domains
Switch #show avc dns-as client trusted-domains
Id | Trusted domain
----------------------------------------------------
1| example.com
2| www.example.com
3| example.net
4| www.example.net
5| example.org
Back to Table 45-2.
Example: show avc dns-as client binding-table detail
Switch# show avc dns-as client binding-table detailed
DNS-AS generated protocols:
Max number of protocols :50
Customization interval [min] :N/A
Age : The amount of time that the entry is active
TTL : Time to live which was learned from DNS-AS server
Time To Expire : Entry expiration time in case device does not see DNS traffic for the
entry host
Protocol-Name : example
VRF : <default>
Host : www.example.com
Age[min] : 2
TTL[min] : 60
Time To Expire[min] : 58
TXT Record : app-name:example|app-class:VO|business:YES
Traffic Class : voip-telephony
Business Relevance : business relevant
IP : 192.0.2.121
: 192.0.2.254
: 198.51.100.1
: 198.51.100.254
: 192.51.100.12
: 203.0.113.125
<output truncated>
Back to Table 45-2.
Example: show avc dns-as client statistics
Note Two DNS servers are configured in this example.
Switch# show avc dns-as client statistics