Cisco Catalyst 4500 Series Software Configuration Guide

50-8
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 50 X.509v3 Certificates for SSH Authentication
Feature Information for X.509v3 Certificates for SSH Authentication
Feature Information for X.509v3 Certificates for SSH
Authentication
Use Cisco Feature Navigator to find information about platform support and software image support.
Cisco Feature Navigator enables you to determine which software images support a specific software
release, feature set, or platform. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn.
An account on Cisco.com is not required.
Note Table 1 lists only the software release that introduced support for a given feature in a given software
release train. Unless noted otherwise, subsequent releases of that software release train also support that
feature.
Table 1 Feature Information for X509v3 Certificates for SSH Authentication
Feature Name Releases Feature Information
X509v3 Certificates for SSH
Authentication
Cisco IOS Release
15.2(4)E1
Cisco IOS XE Release
3.8.1E
The X.509v3 Certificates for SSH Authentication feature
uses the X5.09v3 digital certificates in server and user
authentication at the SSH server side.
The following commands were introduced or modified:
ip ssh server algorithm hostkey, ip ssh server
algorithm authentication, and ip ssh server certificate
profile.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E