Cisco Catalyst 4500 Series - Displaying on Board Failure Logging (OBFL) Information for 9000 W AC

14-4
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 14 Environmental Monitoring and Power Management
About Environmental Monitoring
The following example illustrates how to display the environment condition on WS-C4500X-32 with a
Supervisor Engine 7-E. The thresholds appear within parentheses.
Switch> show environment
no temperature alarms
Module Sensor Temperature Status
------+--------------------------+--------------------+------------
1 XPP 42C (80C,90C,100C) ok
1 VFE 47C (80C,90C,100C) ok
1 CPU 46C (80C,90C,100C) ok
1 FPGA 50C (80C,90C,100C) ok
1 Stub A 34C (80C,90C,100C) ok
1 Stub B 35C (80C,90C,100C) ok
2 Air inlet 31C (80C,90C,100C) ok
2 Air outlet 36C (80C,90C,100C) ok
Power Fan Inline
Supply Model No Type Status Sensor Status
------ ---------------- --------- ----------- ------- -------
PS1 none -- -- -- --
PS2 PWR-C49X-750AC-R AC 750W good good n.a.
Power supplies needed by system : 1
Power supplies currently available : 1
Chassis Type : WS-C4500X-32
Power consumed by backplane : 0 Watts
Switch Bandwidth Utilization : 0%
Supervisor Led Color : Green
Module 1 Status Led Color : Green
Module 2 Status Led Color : Green
Beacon Led Status : off
Fan trays needed by system : 4
Fan trays currently available : 5
Chassis fan tray direction : FrontToBack
Fantray 1 : dir : FrontToBack status : Good
Fantray 2 : dir : FrontToBack status : Good
Fantray 3 : dir : FrontToBack status : Good
Fantray 4 : dir : FrontToBack status : Good
Fantray 5 : dir : FrontToBack status : Good
Fantray removal timeout : 30
Power consumed by Fantray : 30 Watts
Switch>
Displaying On Board Failure Logging (OBFL) information for 9000W AC
9000W AC power supplies support logging of voltage sag (input voltage drops below a certain input
threshold) and voltage surge (input voltage spikes above a certain input threshold) events.