Cisco Catalyst 4500 Series - Page 553

14-3
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 14 Environmental Monitoring and Power Management
About Environmental Monitoring
Power consumed by backplane : 40 Watts
Switch Bandwidth Utilization : 0%
Supervisor Led Color : Green
Module 2 Status Led Color : Green
Module 5 Status Led Color : Green
Module 6 Status Led Color : Orange
Module 10 Status Led Color : Green
Fantray : Good
Power consumed by Fantray : 80 Watts
The following example illustrates how to display the environment condition on WS-C4506-E with a
Supervisor Engine 7-E. The thresholds appear within parentheses.
Switch# show environment
Module Sensor Temperature Status
------+--------------------------+--------------------+------------
1 Xgstub A 39C (48C,62C,65C) ok
1 Xgstub B 32C (45C,60C,63C) ok
1 XPP 47C (62C,75C,78C) ok
1 VFE2 59C (74C,85C,88C) ok
1 NFE 44C (63C,75C,78C) ok
1 CPU 55C (57C,72C,75C) ok
1 FPGA 37C (52C,66C,69C) ok
4 Power macro 30C (56C,68C,71C) ok
4 Air inlet 27C (46C,59C,62C) ok
4 Xgstub 31C (66C,76C,79C) ok
4 Air outlet 30C (60C,71C,74C) ok
Power Fan Inline
Supply Model No Type Status Sensor Status
------ ---------------- --------- ----------- ------- -------
PS1 PWR-C45-1300ACV AC 1300W good good good
PS2 none -- -- -- --
Power supplies needed by system : 1
Power supplies currently available : 1
Chassis Type : WS-C4506-E
Power consumed by backplane : 0 Watts
Switch Bandwidth Utilization : 0%
Supervisor Led Color : Green
Module 1 Status Led Color : Green
Module 4 Status Led Color : Green PoE Led Color : Green
Module 6 Status Led Color : Green PoE Led Color : Green
Fantray : Good
Fantray removal timeout : 30
Power consumed by Fantray : 120 Watts