EasyManuals Logo

Cisco Catalyst 4500 Series Software Configuration Guide

Cisco Catalyst 4500 Series
2086 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1450 background imageLoading...
Page #1450 background image
53-8
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 53 Configuring Wired Guest Access
Configuration Examples for Wired Guest Access
!
wireless management interface Vlan80
!
wireless mobility controller peer-group pg-name
wireless mobility controller peer-group pg-name member ip 10.20.1.1 public-ip 10.20.1.1 <<
Mobility Agent IP >>
!
wireless mobility group member ip 10.20.1.3 public-ip 10.20.1.3 << Guest Controller IP >>
wireless mobility group name mcg-name
!
Example: Configuring the Guest Controller
The following example shows how to configure interface ports on the guest controller (anchor) and how
to set up DHCP snooping.
The guest (local WLAN) controller anchors the client onto a demilitarized zone (DMZ) anchor WLAN
controller that is configured for wired and wireless guest access. After a successful handoff of the client
to the DMZ anchor controller, the DHCP IP address assignment, client authentication, and so on are
handled in the DMZ Cisco Wireless LAN Controller (WLC). After WLC completes the authentication,
the client is allowed to send and receive traffic.
!
interface GigabitEthernet1/1
description Connected_to_MC
switchport mode trunk
!
interface Vlan10
description CLIENT-VLAN
ip address 172.16.10.200 255.255.255.0
!
interface Vlan80
description MANAGEMENT-VLAN
ip address 10.20.1.3 255.255.255.0
!
ip dhcp snooping vlan 10
ip dhcp snooping
ip dhcp excluded-address 172.16.10.100 172.16.10.255
ip dhcp pool vlan10
network 172.16.10.0 255.255.255.0
default-router 172.16.10.200
!
wireless management interface Vlan80
!
wireless mobility group name mcg-name
wireless mobility group member ip 10.20.1.2 public-ip 10.20.1.2 << Mobility Controller IP
>>
!
guest-lan glan-1 1
shutdown
client vlan Vlan10
no security web-auth << Use "security web-auth" for web-auth access & "no security
web-auth" for open access. >>
mobility anchor
no shutdown
!

Table of Contents

Other manuals for Cisco Catalyst 4500 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Catalyst 4500 Series and is the answer not in the manual?

Cisco Catalyst 4500 Series Specifications

General IconGeneral
SeriesCatalyst 4500 Series
CategorySwitch
Layer SupportLayer 2, Layer 3
Form FactorModular chassis
StackableNo
Chassis Slots3, 6, 7, 10
Power Supply OptionsAC, DC
RedundancyPower supply, Supervisor engine
Network ManagementCisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
FeaturesSecurity, QoS
Port DensityUp to 384 ports per chassis
Security Features802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine8-E

Related product manuals