Name: Cisco Catalyst 4500 Series
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

1-16

Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex

Chapter 1 Product Overview

Layer 3 Software Features

Gateway Load Balancing Protocol (GLBP), GLBP MD5 Authentication

http://www.cisco.com/en/US/docs/ios/12_2sx/12_2sxh/feature/guide/sxglbpm.html

HSRP

The Hot Standby Router Protocol (HSRP) provides high network availability by routing IP traffic from

hosts on Ethernet networks without relying on the availability of any single Layer 3 switch. This feature

is particularly useful for hosts that do not support a router discovery protocol and do not have the

functionality to switch to a new router when their selected router reloads or loses power.

For information on configuring HSRP, refer to the following URL:

http://www.cisco.com/en/US/tech/tk648/tk362/tk321/tsd_technology_support_sub-protocol_home.htm

Cisco IOS XE IP Application Services: HSRP Features in Cisco IOS XE 3.1.0SG

This section lists the IP Application Services:HSRP software features that are supported in Cisco IOS

XE 3.1.0SG. Links to the feature documentation are included.

Feature guides may contain information about more than one feature. To find information about a

specific feature within a feature guide, see the Feature Information table at the end of the guide.

Feature guides document features that are supported on many different software releases and platforms.

Your Cisco software release or platform may not support all the features documented in a feature guide.

See the Feature Information table at the end of the feature guide for information about which features in

that guide are supported in your software release. Use Cisco Feature Navigator to find information about

platform support and Cisco software image support. To access Cisco Feature Navigator, go to

http://www.cisco.com/go/cfn. An account on Cisco.com is not required.

HSRP—Hot Standby Router Protocol