EasyManua.ls Logo

Cisco Catalyst 4500 Series - Displaying VRF-Lite Status

Cisco Catalyst 4500 Series
2086 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
43-21
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 43 Configuring VRF-lite
Configuring VRF-lite for IPv6
router ospfv3 200
router-id 50.50.50.50
!
address-family ipv6 unicast vrf v2
redistribute connected
area 0 normal
exit-address-family
!
Displaying VRF-lite Status
To display information about VRF-lite configuration and status, perform one of the following tasks:
Note For more information about the information in the displays, refer to the Cisco IOS Switching Services
Command Reference at:
http://www.cisco.com/en/US/docs/ios/ipswitch/command/reference/isw_book.html
To display information about VRF-lite configuration and status, perform one of the following tasks:
When you configure VRF table “a” with the IPv6 address family and attach the VRF to the interface with
IPv6 address 1::2/64, the show ipv6 route vrf a command displays the following output:
Switch# show ipv6 route vrf a
IPv6 Routing Table - a - 3 entries
Codes: C - Connected, L - Local, S - Static, U - Per-user Static route
B - BGP, R - RIP, I1 - ISIS L1, I2 - ISIS L2
IA - ISIS interarea, IS - ISIS summary, D - EIGRP, EX - EIGRP external
Command Purpose
Switch# show ipv6 route vrf a
[X:X:X:X::X/<0-128>] [bgp] [connected]
[eigrp] [interface] [isis] [local]
[nd] [nsf] [ospf ] [repair] [rip]
[shortcut] [static] [summary] [tag]
[updated] [watch]
Displays routing protocol information associated with a VRF.
X:X:X:X::X/<0-128> IPv6 prefix
bgp BGP routes
connected Connected routes
eigrp EIGRP routes
interface interface specific routes
isis IS-IS routes
local Local routes
nd ND routes
nsf non stop forwarding state
ospf OSPFv3 routes
repair Routes with Repair paths
rip RIPng routes
shortcut Routes with Shortcut paths
static Static routes
summary Summary display
tag Route Tag
updated Show routes with timestamps
watch route watchers
Switch# show ipv6 vrf [brief | detail
| interfaces] [vrf-name]
Displays information about the defined VRF instances.
brief Brief VPN Routing/Forwarding instance information
detail Detailed VPN Routing/Forwarding instance information
interfaces Show VPN Routing/Forwarding interface information

Table of Contents

Other manuals for Cisco Catalyst 4500 Series

Related product manuals