Cisco Catalyst 4500 Series Software Configuration Guide

4-17
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 4 Administering the Switch
Managing Software Licenses Using Permanent Right-To-Use Features
Deactivating a PRTU License
To deactivate a PRTU license on a switch, enter the following command in privileged EXEC mode:
Displaying Software License Information
To display information about the software licenses on your switch, use one of these methods:
• Use Cisco License Manager to view license and device information. In the GUI, the discovery and
polling features collect all the license and device information that appears in the Properties window.
For detailed instructions, see the Cisco License Manager online help.
• Use the Cisco IOS privileged EXEC commands in Table 2.
This is an example of output from the show license command:
Switch# show license detail
Index: 1 Feature: entservices Version: 1.0
License Type: Evaluation
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 3 days
License State: Active, Not in Use, EULA accepted
License Count: Non-Counted
License Priority: Low
Store Index: 0
Store Name: Dynamic Evaluation License Storage
Index: 2 Feature: entservices Version: 1.0
License Type: PermanentRightToUse
License State: Inactive
License Count: Non-Counted
Store Index: 1
Store Name: Dynamic Evaluation License Storage
Index: 3 Feature: ipbase Version: 1.0
License Type: Permanent
Command Purpose
license right-to-use deactivate feature-name Deactivates a license on a switch.
Table 2 Commands for Displaying Software License Information
Command Description
show license agent {counters |
session}
Displays the information about the software license agent.
For information about the show license agent privileged
EXEC command, see the Cisco Software Activation Tasks and
Commands feature module.
show license [all | detail
[feature-name | feature | file |
statistics | status | udi | right-to-use |
summary | permanent | in-use |
image levels | evaluation | expiring]
Displays information about the software license.
For information about the show license privileged EXEC
command, see the Cisco IOS Software Licensing feature
module at this URL:
http://www.cisco.com/en/US/docs/ios/12_2/12_2se/feature/guid
e/se_cisl.html
show version Displays the software licenses installed on the switch.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E