Cisco Catalyst 4500 Series - Displaying Embedded Ciscoview Information

4-48
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 4 Administering the Switch
Configuring Embedded CiscoView Support
Displaying Embedded CiscoView Information
To display the Embedded CiscoView information, enter the following commands:
The following example shows how to display the Embedded CiscoView file and version information:
Switch# show ciscoview package
File source:
CVFILE SIZE(in bytes)
------------------------------------------------
Cat4000IOS-5.1.sgz 1956591
Cat4000IOS-5.1_ace.html 7263
Cat4000IOS-5.1_error.html 410
Cat4000IOS-5.1_install.html 2743
Cat4000IOS-5.1_jks.jar 20450
Cat4000IOS-5.1_nos.jar 20782
applet.html 12388
cisco.x509 529
identitydb.obj 2523
Switch# show ciscoview version
Engine Version: 5.3.4 ADP Device: Cat4000IOS ADP Version: 5.1 ADK: 49
Switch#
Command Purpose
Switch# show ciscoview package
Displays information about the Embedded CiscoView files.
Switch# show ciscoview version
Displays the Embedded CiscoView version.