CHAPTER
77-1
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
77
Configuring Call Home
This chapter describes how to configure the Call Home feature in Catalyst 4500 Series Switch.
This chapter includes the following sections:
• About Call Home, page 77-1
• Obtaining Smart Call Home, page 77-2
• Configuring Call Home, page 77-3
• Configuring Contact Information, page 77-4
• Configuring Destination Profiles, page 77-5
• Subscribing to Alert Groups, page 77-6
• Configuring General E-Mail Options, page 77-9
• Enabling Call Home, page 77-10
• Testing Call Home Communications, page 77-10
• Configuring and Enabling Smart Call Home, page 77-13
• Displaying Call Home Configuration Information, page 77-13
• Call Home Default Settings, page 77-18
• Alert Group Trigger Events and Commands, page 77-18
• Message Contents, page 77-21
Note For complete syntax and usage information for the switch commands used in this chapter, see the
Cisco IOS Command Reference Guides for the Catalyst 4500 Series Switch.
If a command is not in the Cisco Catalyst 4500 Series Switch Command Reference , you can locate it in
the Cisco IOS Master Command List, All Releases.
About Call Home
Call Home provides e-mail-based and web-based notification of critical system events. A versatile range
of message formats are available for optimal compatibility with pager services, standard e-mail, or
XML-based automated parsing applications. Common uses of this feature may include direct paging of
To Next Page
Loading...
Need help?
General
