Cisco Catalyst 4500 Series Software Configuration Guide

49-128
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 49 Configuring 802.1X Port-Based Authentication
Cisco IOS Security Features
Example 2
Switch# conf terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)# epm logging
Switch(config)# int f9/25
Switch(config-if)# shut
Switch(config-if)# no shut
*May 15 08:41:56.329: %EPM-6-IPEVENT: IP=100.0.0.222| MAC=0000.0000.0001|
AUDITSESID=0A050B2C0000026108FB7924| AUTHTYPE=DOT1X|
EVENT=IP-RELEASE
*May 15 08:41:56.333: %EPM-6-IPEVENT: IP=100.0.0.222| MAC=0000.0000.0001|
AUDITSESID=0A050B2C0000026108FB7924| AUTHTYPE=DOT1X|
EVENT=IP-WAIT
Cisco IOS Security Features
This document provides a list of security software features that are supported in Cisco IOS XE 3.1.0SG. Links to the feature
documentation are included.
Feature guides may contain information about more than one feature. To find information about a specific feature within a
feature guide, see the Feature Information table at the end of the guide.
Feature guides document features that are supported on many different software releases and platforms. Your Cisco software
release or platform may not support all the features documented in a feature guide. See the Feature Information table at the end
of the feature guide for information about which features in that guide are supported in your software release. Use Cisco Feature
Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator,
go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.
Role-Based Access Control CLI Commands
http://www.cisco.com/en/US/docs/ios/sec_user_services/configuration/guide/sec_role_base_cli.html
Authentication Proxy Accounting for HTTP
http://www.cisco.com/en/US/docs/ios/sec_user_services/configuration/guide/sec_cfg_authen_prxy.html
Enhanced Password Security
http://www.cisco.com/en/US/docs/ios/sec_user_services/configuration/guide/sec_cfg_sec_4cli.html
IEEE 802.1X - Flexible Authentication
http://www.cisco.com/en/US/docs/ios/sec_user_services/configuration/guide/sec_cfg_authen_prxy.html
Image Verification
http://www.cisco.com/en/US/docs/ios/sec_user_services/configuration/guide/sec_image_verifctn.html
Manual Certificate Enrollment via TFTP
http://www.cisco.com/en/US/docs/ios/sec_secure_connectivity/configuration/guide/sec_cert_enroll_pki.html

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E