Cisco Catalyst 4500 Series - Page 143

2-19
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 2 Command-Line Interfaces
Displaying a Crash Dump for Supervisor Engine 6-E and 6L-E
L2CAPTECC: 0x0
L2ERRDET: 0x0
L2ERRDIS: 0x0
L2ERRATTR: 0x0
L2ERRADDRH: 0x0L2ERRADDRL: 0x0
L2_ERRCTL: 0x0
DDR_CAPTURE_DATA_HI: 0x0 DDR_CAPTURE_DATA_LO: 0x0
DDR_CAPTURE_ECC: 0x0
DDR_ERR_DETECT: 0x0
DDR_ERR_DISABLE: 0x0
DDR_ERR_INT_EN: 0x9
DDR_CAPTURE_ATTRIBUTES: 0x0
DDR_CAPTURE_ADDRESS: 0x0
DDR_CAPTURE_EXT_ADDRESS: 0x0
DDR_ERR_SBE: 0xff0000
PCI_ERR_DR: 0x0
PCI_ERR_ATTRIB: 0x0
PCI_ERR_ADDR: 0x0
PCI_ERR_EXT_ADDR: 0x0
PCI_ERR_DH: 0x0PCI_ERR_DL: 0x0
Machine Check Interrupt Count: 0
L1 Instruction Cache Parity Errors: 0
L1 Instruction Cache Parity Errors (CPU30): 0
L1 Data Cache Parity Errors: 0
Jawa Crash Data:
Interrupt Mask: 0xe180
Interrupt: 0x0
GalK5DriverMan( 0 )
SlotType( 3 )
State( GalK5DriverManStateReady )
SilentRollRegister( 0 )
GldMajorVersion( 0 )
CardRevision( 0 )
GldMinor( 1)
Load Dynamic Driver( No )
GalK5DriverMan( 1 )
SlotType( 1 )
State( GalK5DriverManStateReady )
SilentRollRegister( 0 )
GldMajorVersion( 0 )
CardRevision( 0 )
GldMinor( 1)
Load Dynamic Driver( No )
Switch#