Cisco Catalyst 4500 Series Software Configuration Guide

77-23
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 77 Configuring Call Home
Message Contents
Server ID If message is generated from fabric switch, UDI of switch. If message
is proxied or originated by MA, the MA should overwrite this field with
the MA UDI.
Format is type@Sid@serial
Where
@: Separator character
• Type: If WS-C4510R, product model number from backplane
SEEPROM.
• Sid: "C" identifying serial ID as a chassis serial number
• Serial: The serial number as identified by the Sid field.
Example: "WS-C4510R@C@CAT234765XR"
For long text message only
Message description Short text describing the error. CallHome/
MessageDescription
Device name Node that experienced the event. it is the host name of the device. CallHome/ CustomerData/
SystemInfo/ Name
Contact name Name of person to contact for issues associated with the node
experiencing the event.
CallHome/CustomerData/Syst
emInfo/Contact
Contact e-mail E-mail address of person identified as contact for this unit. CallHome/CustomerData/Syst
emInfo/ContactEmail
Contact phone
number
Phone number of the person identified as the contact for this unit. CallHome/CustomerData/Syst
emInfo/ContactPhoneNumber
Street address Optional field containing street address for RMA part shipments
associated with this unit.
CallHome/CustomerData/Syst
emInfo/StreetAddress
Model name Model name of the unit (such as WS-C4503). it is the specific model as
part of a product family name.
CallHome/ Device/
Cisco_Chassis/Model
Serial number Chassis serial number of the unit. CallHome/ Device/
Cisco_Chassis/ SerialNumber
Chassis part number Top assembly number of the chassis as read from SEEPROM (such as
WS-C4503 = 73-10558).
CallHome/Device/Cisco_Chas
sis/AdditionalInformation/
AD@name="PartNumber"
Fields specific to a particular alert group message are inserted here.
The following fields may be repeated if multiple CLI commands are executed for this alert group.
Command output
name
The exact command that was run (such as the show running-config
command).
/aml/attachments/attachment/
name
Table 77-5 Common Fields for All Long Text and XML Messages (continued)
Data Item
(Plain Text and XML)
Description
(Plain Text and XML)
XML Tag
(XML Only)

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E