Cisco Catalyst 4500 Series - Page 1970

80-6
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 80 Performing Diagnostics
Detailed Status
---------------
. = Pass U = Unknown
L = Loopback failure S = Stub failure
P = Port failure
E = SEEPROM failure G = GBIC integrity check failure
Ports 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
. . . . . . . . . . . . . . . .
Ports 17 18 19 20 21 22 23 24
___________________________________________________________________________
2) online-diag-tdr:
Port 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
----------------------------------------------------------------------------
U U . U U U U U U U U U U U U U U U U U U U U U
Error code ------------------> 0 (DIAG_SUCCESS)
Total run count -------------> 1
Last test testing type ------> OnDemand
Last test execution time ----> Jun 03 2009 05:39:00
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> Jun 03 2009 05:39:00
Total failure count ---------> 0
Consecutive failure count ---> 0
Detailed Status
---------------
Interface Speed Local pair Cable length Remote channel Status
Gi6/3 1Gbps 1-2 N/A Unknown Terminated
3-6 N/A Unknown Terminated
4-5 N/A Unknown Terminated
7-8 N/A Unknown Terminated
___________________________________________________________________________
3) stub-rx-errors -------------------> .
Error code ------------------> 3 (DIAG_SUCCESS)
Total run count -------------> 4
Last test testing type ------> Health Monitoring
Last test execution time ----> Dec 20 2009 22:30:41
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> Dec 20 2009 22:30:41
Total failure count ---------> 0
Consecutive failure count ---> 0
___________________________________________________________________________
4) supervisor-rx-trends ----------> .
Error code ------------------> 3 (DIAG_SUCCESS)
Total run count -------------> 4
Last test testing type ------> Health Monitoring
Last test execution time ----> Dec 20 2009 22:30:41
First test failure time -----> n/a