Index
IN-37
Software Configuration Guide—Release IOS XE 3.9.0E and IOS 15.2(5)E
Storm Control
displaying
6
enabling Broadcast 2
enabling Multicast 4
hardware-based, implementing 1
overview 1
software-based, implementing 2
STP
and REP
6
bridge ID 2
configuring 7–20
creating topology 5
defaults 7
disabling 20
enabling 8
enabling extended system ID 9
enabling Per-VLAN Rapid Spanning Tree 20
EtherChannel guard
disabling
7
forward-delay time 19
hello time 17
Layer 2 protocol tunneling 13
maximum aging time 18
overview 1, 3
per-VLAN rapid spanning tree 6
port cost 15
port priority 13
root bridge 9
stratum, NTP 2
stub routing (EIGRP)
benefits
18
configuration tasks 18
configuring 14
overview 13, 14
restrictions 18
verifying 19
subdomains, private VLAN 2
summer time 13
supervisor engine
accessing the redundant
14
configuring 8–13
copying files to standby 14
default configuration 1
default gateways 11
environmental monitoring 1
redundancy 1
ROM monitor 26
startup configuration 25
static routes 11
synchronizing configurations 11, 10
Supervisor Engine 7L-E, selecting the uplink port 25
Supervisor Engine II-TS
insufficient inline power handling
22, 12
Smartports macros
See also Auto Smartports macros
SVI Autostate Exclude
understanding
3
SVI Autostate exclude
configuring
8
S-VLAN 2, 7
switch 2
switch access with RADIUS, controlling 95
switch ports
See access ports
switched packets
and ACLs
29
Switched Port Analyzer
See SPAN
switchport
show interfaces
37, 38, 46, 47
switchport access vlan command 5, 7
switchport block multicast command 2
switchport block unicast command 2
switchport mode access command 7
switchport mode dot1q-tunnel command 6
switchport mode dynamic command 5
switchport mode trunk command 5
switchport trunk allowed vlan command 5
To Next Page
Loading...
