Contents
20
Software Configuration Guide—Release IOS XE 3.9.xE and IOS 15.2(5)Ex
Layer 2 Interface Modes 19-3
Default Layer 2 Ethernet Interface Configuration 19-4
Layer 2 Interface Configuration Guidelines and Restrictions 19-4
Configuring Ethernet Interfaces for Layer 2 Switching 19-5
Configuring an Ethernet Interface as a Layer 2 Trunk 19-5
Configuring an Interface as a Layer 2 Access Port 19-7
Clearing Layer 2 Configuration 19-8
Configuring EVC-Lite 20-1
About EVC-Lite 20-1
How to Configure EVC-Lite 20-2
Configuring SmartPort Macros 21-1
About SmartPort Macros and Static SmartPort 21-1
Configuring SmartPort Macros 21-2
Passing Parameters Through the Macro 21-2
Macro Parameter Help 21-3
Default SmartPort Macro Configuration 21-3
cisco-global 21-4
cisco-desktop 21-4
cisco-phone 21-4
cisco-router 21-5
cisco-switch 21-5
SmartPort Macro Configuration Guidelines 21-6
Creating SmartPort Macros 21-7
Applying SmartPort Macros 21-8
cisco-global 21-9
cisco-desktop 21-9
cisco-phone 21-10
cisco-switch 21-11
cisco-router 21-11
Displaying SmartPort Macros 21-12
Configuring Static SmartPort Macros 21-13
Default Static SmartPort Configuration 21-13
Static SmartPort Configuration Guidelines 21-13
Applying Static SmartPort Macros 21-14
Configuring Cisco IOS Auto Smartport Macros 22-1
About Auto Smartport Macros 22-1
Device Classifier 22-2
To Next Page
Loading...
