Contents
23
Software Configuration Guide—Release IOS XE 3.9.xE and IOS 15.2(5)Ex
Configuring Flex Links 24-6
Configuring VLAN Load Balancing on Flex Links 24-8
Configuring MAC Address-Table Move Update 24-9
Default Configuration 24-9
Configuration Guidelines 24-9
Configuring the MAC Address-Table Move Update Feature 24-10
Configuring a Switch to Send MAC Address-Table Move Updates 24-10
Configuring a Switch to Receive MAC Address-Table Move Updates 24-11
Monitoring Flex Links and the MAC Address-Table Move Update 24-12
24-12
Configuring Resilient Ethernet Protocol 25-1
About REP 25-1
Link Integrity 25-4
Fast Convergence 25-4
VLAN Load Balancing 25-4
Spanning Tree Interaction 25-6
REP Ports 25-6
Configuring REP 25-7
Default REP Configuration 25-7
REP Configuration Guidelines 25-7
Configuring the REP Administrative VLAN 25-8
Configuring REP Interfaces 25-10
Setting Manual Preemption for VLAN Load Balancing 25-13
Configuring SNMP Traps for REP 25-14
Monitoring REP 25-14
Configuring Optional STP Features 26-1
About Root Guard 26-2
Enabling Root Guard 26-2
About Loop Guard 26-3
Enabling Loop Guard 26-5
About EtherChannel Guard 26-6
Enabling EtherChannel Guard (Optional) 26-6
About STP PortFast Port Types 26-7
Enabling PortFast Port Types 26-8
Configuring the PortFast Default State Globally 26-8
Configuring a PortFast Edge Port on a Specified Interface 26-8
Configuring a PortFast Network Port on a Specified Interface 26-10
To Next Page
Loading...
