Cisco Catalyst 4500 Series - Page 29

Contents
25
Software Configuration Guide—Release IOS XE 3.9.xE and IOS 15.2(5)Ex
Removing an Interface from an EtherChannel 27-19
Removing an EtherChannel 27-20
Displaying EtherChannel to a Virtual Switch System 27-20
Understanding VSS Client 27-21
Virtual Switch System 27-21
Dual-Active Scenarios 27-21
Dual-Active Detection Using Enhanced PAgP 27-21
Displaying EtherChannel Links to VSS 27-23
Understanding Link-State Tracking 27-23
Configuring Link-State Tracking 27-26
Default Link-State Tracking Configuration 27-26
Link-State Tracking Configuration Guidelines 27-26
Configuring Link-State Tracking 27-26
Displaying Link-State Tracking Status 27-27
Configuring IGMP Snooping and Filtering,
and MVR
28-1
About IGMP Snooping 28-1
Immediate-Leave Processing 28-3
IGMP Configurable-Leave Timer 28-4
IGMP Snooping Querier 28-4
Explicit Host Tracking 28-4
Configuring IGMP Snooping 28-5
Default IGMP Snooping Configuration 28-5
Enabling IGMP Snooping Globally 28-6
Enabling IGMP Snooping on a VLAN 28-6
Configuring Learning Methods 28-7
Configuring PIM/DVMRP Learning 28-7
Configuring CGMP Learning 28-7
Configuring a Static Connection to a Multicast Router 28-8
Enabling IGMP Immediate-Leave Processing 28-8
Configuring the IGMP Leave Timer 28-9
Configuring IGMP Snooping Querier 28-10
Configuring Explicit Host Tracking 28-11
Configuring a Host Statically 28-11
Suppressing Multicast Flooding 28-12
IGMP Snooping Interface Configuration 28-12
IGMP Snooping Switch Configuration 28-13
Displaying IGMP Snooping Information 28-14
Displaying Querier Information 28-15