Contents
31
Software Configuration Guide—Release IOS XE 3.9.xE and IOS 15.2(5)Ex
IP Multicast Tables 38-7
Hardware and Software Forwarding 38-9
Non-Reverse Path Forwarding Traffic 38-10
Multicast Fast Drop 38-11
Multicast Forwarding Information Base 38-12
S/M, 224/4 38-13
Multicast HA 38-13
Configuring IP Multicast Routing 38-13
Default Configuration in IP Multicast Routing 38-14
Enabling IP Multicast Routing 38-14
Enabling PIM on an Interface 38-15
Enabling Dense Mode 38-15
Enabling Sparse Mode 38-15
Enabling Sparse-Dense Mode 38-15
Enabling Bidirectional Mode 38-16
Enabling PIM-SSM Mapping 38-17
Configuring a Rendezvous Point 38-17
Configuring Auto-RP 38-18
Configuring a Single Static RP 38-21
Load Splitting of IP Multicast Traffic 38-22
Monitoring and Maintaining IP Multicast Routing 38-23
Displaying System and Network Statistics 38-24
Displaying the Multicast Routing Table 38-24
Displaying IP MFIB 38-26
Displaying Bidirectional PIM Information 38-27
Displaying PIM Statistics 38-28
Clearing Tables and Databases 38-28
Configuration Examples 38-29
PIM Dense Mode Example 38-29
PIM Sparse Mode Example 38-29
Bidirectional PIM Mode Example 38-29
Sparse Mode with a Single Static RP Example 38-30
Sparse Mode with Auto-RP: Example 38-30
Configuring ANCP Client 39-1
About ANCP Client 39-1
Enabling and Configuring ANCP Client 39-2
Identifying a Port with the ANCP Protocol 39-2
Example 1 39-3
Example 2 39-4
To Next Page
Loading...
