Contents
37
Software Configuration Guide—Release IOS XE 3.9.xE and IOS 15.2(5)Ex
How to Implement Policing 44-52
Platform Restrictions 44-52
Marking Network Traffic 44-52
Contents 44-53
Information About Marking Network Traffic 44-53
Marking Action Drivers 44-55
Traffic Marking Procedure Flowchart 44-55
Restrictions for Marking Network Traffic 44-56
Multi-attribute Marking Support 44-56
Hardware Capabilities for Marking 44-57
Configuring the Policy Map Marking Action 44-57
Marking Statistics 44-59
Shaping, Sharing (Bandwidth), Priority Queuing, Queue-limiting and DBL 44-59
Shaping 44-59
Sharing(bandwidth) 44-61
Priority queuing 44-64
Queue-limiting 44-65
Active Queue Management (AQM) via Dynamic Buffer Limiting (DBL) 44-68
Transmit Queue Statistics 44-69
Enabling Per-Port Per-VLAN QoS 44-70
Policy Associations 44-73
Software QoS 44-74
Applying Flow-based QoS Policy 44-75
Examples 44-76
Configuration Guidelines 44-78
Configuring CoS Mutation 44-79
Configuring System Queue Limit 44-80
Configuring VSS Auto-QoS 44-81
Auto-QoS Overview 44-81
Auto-QoS Policy and Class Maps 44-82
Auto-Qos Compact 44-87
Effects of Auto-QoS and Auto-Qos Compact on Running Configuration 44-88
Configuring Auto-QoS on a Standalone Supervisor Engine 6-E/6L-E or Supervisor Engine
7-E/7L-E/8-E
44-88
Auto-QoS Overview 44-88
Auto-QoS Policy and Class Maps 44-89
Auto-QoS Compact 44-96
Effects of Auto-QoS and Auto-Qos Compact on Running Configuration 44-97
To Next Page
Loading...
