Contents
54
Software Configuration Guide—Release IOS XE 3.9.xE and IOS 15.2(5)Ex
Displaying an ACL Configuration on a Layer 2 Interface 62-36
Using PACL with VLAN Maps and Router ACLs 62-36
Configuring Object Group ACLs 62-39
Overview 62-39
Configuring IPv4 OG ACLs 62-40
Guidelines and Restrictions for Configuring IPv4 OG ACLs 62-40
Creating a Network Object Group 62-40
Creating a Service Object Group 62-42
Configuring an IPv4 OG ACL 62-43
Applying an IPv4 OG ACL to an Interface 62-44
Verifying IPv4 OG ACLs 62-45
Configuring IPv6 OG ACLs 62-46
Guidelines and Restrictions for Configuring IPv6 OG ACLs 62-46
Creating a IPv6 Address Network Object Group 62-46
Creating an IPv6 Service Object Group 62-47
Configuring an IPv6 OG ACL 62-48
Applying an IPv6 OG ACL to an Interface 62-48
Verifying IPv6 OG ACLs 62-49
Configuring RA Guard 62-49
Introduction 62-50
Deployment 62-50
Configuring RA Guard 62-51
Examples 62-51
Usage Guidelines 62-52
Support for IPv6 63-1
Finding Feature Information 63-1
About IPv6 63-1
IPv6 Addressing and Basic Connectivity 63-2
DHCP 63-3
Security 63-3
First-Hop Security 63-4
QoS 63-4
Management 63-4
Multicast 63-5
Static Routes 63-5
First-Hop Redundancy Protocols 63-6
Unicast Routing 63-6
RIP 63-6
OSPF 63-6
To Next Page
Loading...
