Cisco Catalyst 4500 Series Software Configuration Guide

23-14
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 23 Configuring STP and MST
Configuring STP
---------------- ---- --- --------- -------- --------------------------------
VLAN0001 Desg FWD 19 128.129 P2p
VLAN1002 Desg FWD 19 128.129 P2p
VLAN1003 Desg FWD 19 128.129 P2p
VLAN1004 Desg FWD 19 128.129 P2p
VLAN1005 Desg FWD 19 128.129 P2p
Switch#
This example shows how to display the details of the interface configuration when the interface is
configured as an access port:
Switch# show spanning-tree interface fastethernet 3/1 detail
Port 129 (FastEthernet3/1) of VLAN0001 is forwarding
Port path cost 19, Port priority 128, Port Identifier 128.129.
Designated root has priority 32768, address 0003.6b10.e800
Designated bridge has priority 32768, address 0003.6b10.e800
Designated port id is 128.129, designated path cost 0
Timers:message age 0, forward delay 0, hold 0
Number of transitions to forwarding state:1
Link type is point-to-point by default
BPDU:sent 187, received 1
Port 129 (FastEthernet3/1) of VLAN1002 is forwarding
Port path cost 19, Port priority 128, Port Identifier 128.129.
Designated root has priority 32768, address 0003.6b10.ebe9
Designated bridge has priority 32768, address 0003.6b10.ebe9
Designated port id is 128.129, designated path cost 0
Timers:message age 0, forward delay 0, hold 0
Number of transitions to forwarding state:1
Link type is point-to-point by default
BPDU:sent 94, received 2
Port 129 (FastEthernet3/1) of VLAN1003 is forwarding
Port path cost 19, Port priority 128, Port Identifier 128.129.
Designated root has priority 32768, address 0003.6b10.ebea
Designated bridge has priority 32768, address 0003.6b10.ebea
Designated port id is 128.129, designated path cost 0
Timers:message age 0, forward delay 0, hold 0
Number of transitions to forwarding state:1
Link type is point-to-point by default
BPDU:sent 94, received 2
Port 129 (FastEthernet3/1) of VLAN1004 is forwarding
Port path cost 19, Port priority 128, Port Identifier 128.129.
Designated root has priority 32768, address 0003.6b10.ebeb
Designated bridge has priority 32768, address 0003.6b10.ebeb
Designated port id is 128.129, designated path cost 0
Timers:message age 0, forward delay 0, hold 0
Number of transitions to forwarding state:1
Link type is point-to-point by default
BPDU:sent 95, received 2
Port 129 (FastEthernet3/1) of VLAN1005 is forwarding
Port path cost 19, Port priority 128, Port Identifier 128.129.
Designated root has priority 32768, address 0003.6b10.ebec
Designated bridge has priority 32768, address 0003.6b10.ebec
Designated port id is 128.129, designated path cost 0
Timers:message age 0, forward delay 0, hold 0
Number of transitions to forwarding state:1
Link type is point-to-point by default
BPDU:sent 95, received 2
Switch#

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E