Cisco Catalyst 4500 Series Software Configuration Guide

68
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 10 Configuring Supervisor Engine
Redundancy Using RPR and SSO
on Supervisor Engine 6-E and
Supervisor Engine 6L-E
Describes how to configure RPR and SSO on
Supervisor Engines 6-E and 6L-E.
Chapter 12 Configuring Supervisor Engine
Redundancy Using RPR and SSO
on Supervisor Engine 7-E,
Supervisor Engine 7L-E, and
Supervisor Engine 8-E
Describes how to configure RPR and SSO on
Supervisor Engines 7-E, 7L-E, and 8-E.
Chapter 13 Configuring Cisco NSF with SSO
Supervisor Engine Redundancy
Describes how to configure supervisor engine
redundancy using Cisco nonstop forwarding (NSF)
with stateful switchover (SSO).
Chapter 14 Environmental Monitoring and
Power Management
Describes how to configure power management and
environmental monitoring features.
Chapter 15 Configuring Power over Ethernet Describes how to configure Power over Ethernet
(PoE).
Chapter 16 Configuring the Catalyst 4500
Series Switch with Cisco Network
Assistant
Describes how to install and configure Network
Assistant and Embedded CiscoView.
Chapter 17 Configuring VLANs, VTP,
and VMPS
Describes how to configure VLANs, VTP, and
VMPS.
Chapter 18 Configuring IP Unnumbered
Interface
Describes how to configure IP Unnumbered
support.
Chapter 19 Configuring Layer 2 Ethernet
Interfaces
Describes how to configure interfaces to support
Layer 2 features, including VLAN trunks.
Chapter 20 Configuring EVC-Lite Describes how to enable EVC-Lite.
Chapter 21 Configuring SmartPort Macros Describes how to configure SmartPort macros.
Chapter 22 Configuring Cisco IOS Auto
Smartport Macros
Describes how to configure Auto SmartPort Macros
Chapter 23 Configuring STP and MST Describes how to configure the Spanning Tree
Protocol (STP) and the Multiple Spanning Tree
(MST) protocol and explains how they work.
Chapter 24 Configuring Flex Links and MAC
Address-Table Move Update
Describes how to how to configure Flex Links on a
switch.
Chapter 25 Configuring Resilient Ethernet
Protocol
Describes how to configure Resilient Ethernet
Protocol (REP).
Chapter 26 Configuring Optional STP
Features
Describes how to configure the spanning-tree
PortFast, UplinkFast, BackboneFast, and other STP
features
Chapter 27 Configuring EtherChannel and
Link State Tracking
Describes how to configure Layer 2 and Layer 3
EtherChannel port bundles.
Chapter 28 Configuring IGMP Snooping and
Filtering, and MVR
Describes how to configure Internet Group
Management Protocol (IGMP) snooping and
Multicast VLAN Registration (MVR).
Chapter Title Description

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E