Cisco Catalyst 4500 Series Software Configuration Guide

70
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 55 Configuring Port Security Describes how to configure port security and trunk
port security.
Chapter 56 Configuring Auto Security Describes how to configure auto security.
Chapter 57 Configuring Control Plane
Policing and Layer 2 Control
Packet QoS
Describes how to protect your Catalyst 4500 series
switch using control plane policing (CoPP).
Chapter 58 Configuring Dynamic ARP
Inspection
Describes how to configure Dynamic ARP
Inspection.
Chapter 60 Configuring DHCP Snooping, IP
Source Guard, and IPSG for Static
Hosts
Describes how to configure DHCP snooping and IP
Source Guard.
Chapter 62 Configuring Network Security
with ACLs
Describes how to configure ACLS, VACLs, and
MACLs.
Chapter 63 Support for IPv6 Describes the support for IPv6 on the switch.
Chapter 64 Port Unicast and Multicast Flood
Blocking
Describes how to configure unicast flood blocking.
Chapter 65 Configuring Storm Control Describes how to configure storm control
suppression.
Chapter 66 Configuring SPAN and RSPAN Describes how to configure the Switched Port
Analyzer (SPAN).
Chapter 68 Configuring Wireshark Describes how to configure Wireshark, the Ethernet
Analyzer on the Catalyst 4500 series switch.
Chapter 69 Configuring Enhanced Object
Tracking
Describres how to configure Enhanced Object
Tracking
Chapter 70 Configuring System Message
Logging
Describes how to configure system message
logging.
Chapter 71 Onboard Failure Logging (OBFL) Describes how to enable OBFL.
Chapter 72 Configuring SNMP Describes how to configure the Simple Network
Management Protocol (SNMP).
Chapter 73 Configuring NetFlow-lite Describes how to configure NetFlow-lite.
Chapter 74 Configuring Flexible NetFlow Describes how to configure Flexible NetFlow,
Chapter 75 Configuring Ethernet OAM and
CFM
Describes how to configure Ethernet OAM and
CFM.
Chapter 76 Configuring Y.1731 (AIS and
RDI)
Describes how to configure Y.1731.
Chapter 77 Configuring Call Home Describes how to configure Call Home.
Chapter 78 Configuring Cisco IOS IP SLA
Operations
Describes how to configure Cisco IOS IP SLA
operations.
Chapter 79 ROM Monitor Describes how to configure Remote Network
Monitoring (RMON).
Chapter 80 Performing Diagnostics Describes various types of diagnostics on the
Catalyst 4500 series switch.
Chapter Title Description

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E